How is the mobile boarding bridge maintained and maintained?
The mobile boarding bridge is an auxiliary tool used for long-distance transportation of cars. How can its maintenance and repair work be sloppy? Let's follow Jinnuo Machinery to understand the relevant information of the mobile boarding bridge.
Maintenance of mobile boarding bridge
I. Monthly maintenance of mobile ascending hydraulic axles
1. Once the hydraulic oil becomes dark, sticky or has foreign bodies such as grit, it should be replaced in time.
2. Each part should be filled with some lubricating oil, so as to extend the service life of the bearing.
3. During maintenance, maintenance and cleaning, it is safer and more reliable to support the adjustment plate with a support bar.
Mobile boarding bridge
Second, year-end maintenance of mobile hydraulic boarding bridge
1. Discard all the hydraulic oil and replace it with new oil to prevent continuous use of old oil. Otherwise, the moving parts in the system will accelerate wear and tear.
2. Check all hydraulic pipes and joints. The pipes must not be damaged, the joints must not be loose, and all joints must be tightened.
3. Remove and disassemble the lowering valve, blow the plunger with compressed air, and then reinstall it.
Product parameters and application methods of mobile boarding bridge
1. Length, the mobile boarding bridge is usually about 11.3 meters in length, with a load of 6 tons, 8 tons, 10 tons, 12 tons and higher. It is very suitable for placing and using on the ground of the open sky field.
2. Inclination, the mobile boarding bridge itself must have a certain inclination to allow the forklift to enter the compartment for loading and unloading of goods. The inclination length varies, and the inclination ranges from 7000mm, 7500mm, and 8000mm. The first consideration is safety And application stability.
Mobile hydraulic boarding bridge
3. Width, the mobile boarding bridge must also have a certain width, how small the width is not conducive to loading and unloading goods for forklift trucks, if the width is too large, it will occupy a certain space, it may not be necessary. Therefore, a reasonable width is necessary. Generally, the width of the mobile boarding bridge is 2000mm. The width of the mobile boarding bridge is divided into the total width and the total width. We have already said that the inner width is the width of the aisle. The total width is mainly the width of the two side rails plus the width of the aisle. The total width can be ignored in application. We are still concerned about the inner width, which is the width of the channel.
4. Height, increasing the height is the most important item of the mobile boarding bridge. The height can be different according to the vehicles of the goods, and the height adjustment can be performed so that it can be equal to the carriage table to load and unload the goods in batches. Because different manufacturers produce mobile boarding bridges, the maximum height of the design and production platform is different from the above-ground interval, and it is 1100mm above the ground. After hydraulically increasing the travel height to 300mm, 400mm, 600mm, the height of the mobile boarding bridge produced by Jinan Jinnuo plus the maximum travel height of 1800mm is almost satisfactory for all freight vehicles (usually 1600 height).
The above is the relevant information about the mobile boarding bridge. I hope that through the maintenance and operation of the mobile boarding bridge introduced by Jinnuo Machinery, you will be more comfortable during the operation of the mobile boarding bridge. Our Jinnuo hydraulic boarding bridge factory is located in Jinan Hydraulic Lifting Equipment Industrial Park, Shandong Province. It is located on National Road 220, with convenient transportation and beautiful environment. Elevators and hydraulic boarding bridges are mainly used to provide customers with a full range of services in design, installation, and maintenance. Welcome customers who are in demand to visit the factory and call for inspection.